Categories
Contact Us

Guangzhou Renlang Electronic Technology Co.,Ltd

Add: Room 306, New Thought Creative Industrial Park,577 Xinshi Lu,Junhe Avenue Baiyun District,Guangzhou China

Contact: Frank Yan

Tel: 86-020-22929583

Mob: 86-13826474063

E-mail: renlang_beauty2@163.com

Picosecond Laser

Picosecond Laser Tattoo Removal Machine

1. Safety Precautions Note: The person who operates or maintains this system must read this manual thoroughly before operating this system. In this case, the laser beam will cause serious injury to the operator, the patient and the surrounding environment if improperly handled, which may result......
Chat Now

详情页_01.jpg


1.Safety Precautions

 

Note: The person who operates or maintains this system must read this manual thoroughly before operating this system. In this case, the laser beam will cause serious injury to the operator, the patient and the surrounding environment if improperly handled, which may result in burning, blindness, fire, explosion, etc. In order to ensure safety

Please note the following safety issues:

 

 

Warning:

ND: YAG laser is invisible infrared light, the wavelength of 1064nm, all laser operating area personnel (including patients) must wear protective glasses!

 

Warning:

The laser window is located at the end of the articulated arm outlet!

Avoid exposure to laser radiation from this window!

 

1. Do not look directly at the end of the articulation arm and any reflected laser beam.

2 flammable, explosive narcotic drugs, liquids, gases (such as alcohol, ether, oxygen) should be the principle of laser radiation area, and protective measures.

3. Metal devices can cause laser reflection, surgery should avoid direct exposure to these devices in the laser

4. On the instrument, and use non-reflective equipment.

5. Operation should be avoided with watches and necklaces, bracelets and other jewelry can be reflected laser.

6. Must provide patients with strict and effective eye protection such as gauze cover, wearing protective glasses, face block and so on.

7. The need to treat the affected area and adjust the light used in the target surface, the use of laser irradiation is strictly prohibited elsewhere; during the treatment of moving the arm and placed after the treatment of articulated arm, the arm of the end of the exit must point to a safe place.

8. Laser treatment room entrance should be affixed with laser radiation warning signs, laser access is strictly prohibited during the use of personnel.

9. Human tissue pigment absorption of different laser, the treatment dose of choice should be small to large.

 

Note: Large spot corresponds to a smaller energy density, small spot corresponds to a larger energy density

 

(2).Eye protection

The pulse width of laser is 10ns - 1ns. The laser beam emitted from the laser window (the end of the arm) is converged at a distance of 70mm from the outlet. The focal length of the focusing lens is 170mm. Without the focal length lens, the laser output divergence angle of about 2mrad.

Any one of the treatment room, direct, such as intraocular laser enough to make the eyes vitreous and retinal damage, resulting in long-blind!

 

 

Warning:

All personnel in the laser operating area must wear safety glasses!

Patients must be provided with strict and effective eye protection!

 

A. People in the operating area must wear laser goggles at a wavelength of 200-1100nm.

B. Laser goggles can not be safe protection Direct laser or glass, mirrors, smooth metal surface reflection of the laser, it is strictly prohibited to wear protective glasses directly above the direct light and reflected light.

C. Cover with gauze, wear protective goggles, face mask, etc. to protect the patient's eyes are effective.

 

(3) Electrical safety The new skin beauty laser machine using 220V power supply, the maximum output current of not more than 10A. With the new skin beauty laser machine connected to the network power must meet the national standard, well-grounded single-phase three-wire power cord blocks, specifications for the 10A. New skin beauty laser machine running time in the high-voltage storage capacitor ---- the charging voltage can be as high as 1.5KV.

 

Note: After turning off the power, high voltage devices may still have residual voltage, free to open the chassis cover may have a high voltage shock hazard!

 

Note: The power cord of the new skin cosmetic laser machine is equipped with a standard 3-pin GB plug. Make sure that your power socket has a protective grounding wire and ensure reliable grounding.

 

(4) Handling safe

New beauty laser machine for the optical-mechanical and electrical integration of precision instruments, machine does not allow users to move long-distance use. As the machine is modular design, the whole machine should be disassembled during transportation. The power supply, laser and joint arm must be packed and transported separately. During transportation, shock absorption packaging must be used. Otherwise, the laser system may be out of balance.

 

2.Treatment principle:

Rox Anderson and John Parrish, "the principle of selective photothermolysis", the shorter the laser action time, the target tissue to absorb the accumulation of laser energy is less likely to spread to the surrounding tissue, the energy was limited extent In the target treatment needs to protect the surrounding normal tissue, so the treatment of the stronger the selectivity. Picosecond laser pulse width is only one hundredth of the traditional Q-switched nanosecond laser, its excellent performance to ensure that picosecond laser pulse crushing of pigment particles more thoroughly, while the surrounding tissue damage

 

3.The main technical parameters, performance indicators:

(1) Working conditions:

A. Ambient temperature: 10~30;

B. Relative humidity: ≤ 75%

C. Atmospheric pressure: 860 ~1060hpa

D. Power supply: AC220V ± 10%, 50Hz ± 20%

E. Cooling water: Use distilled water or pure distilled water.


Hot Tags: picosecond laser tattoo removal machine, China, manufacturers, suppliers, factory, wholesale, cheap, price
  • Newsletter
  • Categories
  • Contact Us

    Guangzhou Renlang Electronic Technology Co.,Ltd

    Add: Room 306, New Thought Creative Industrial Park,577 Xinshi Lu,Junhe Avenue Baiyun District,Guangzhou China

    Contact: Frank Yan

    Tel: 86-020-22929583

    Mob: 86-13826474063

    E-mail: renlang_beauty2@163.com

  • QR Code
  • Copyright © Guangzhou Renlang Electronic Technology Co.,Ltd All Rights Reserved.